Gradients in embolism resistance within stems driven by secondary growth in herbs.

The stems of some herbaceous species can undergo basal secondary growth, leading to a continuum in the degree of woodiness along the stem. Whether the formation of secondary growth in the stem base results in differences in embolism resistance between the base and the upper portions of stems is unknown. We assessed the embolism resistance of leaves and the basal and upper portions of stems simultaneously within the same individuals of two divergent herbaceous species that undergo secondary growth in the mature stem bases. The species were Solanum lycopersicum (tomato) and Senecio minimus (fireweed). Basal stem in mature plants of both species displayed advanced secondary growth and greater resistance to embolism than the upper stem. This also resulted in significant vulnerability segmentation between the basal stem and the leaves in both species. Greater embolism resistance in the woodier stem base was found alongside decreases in the pith-to-xylem ratio, increases in the proportion of secondary xylem, and increases in lignin content. We show that there can be considerable variation in embolism resistance across the stem in herbs and that this variation is linked to the degree of secondary growth present. A gradient in embolism resistance across the stem in herbaceous plants could be an adaptation to ensure reproduction or basal resprouting during episodes of drought late in the lifecycle.

Molecular Modeling of Shockwave-Mediated Blood-Brain Barrier Opening for Targeted Drug Delivery.

Bubble-enhanced shock waves induce the transient opening of the blood-brain barrier (BBB) providing unique advantages for targeted drug delivery of brain tumor therapy, but little is known about the molecular details of this process. Based on our BBB model including 28 000 lipids and 280 tight junction proteins and coarse-grained dynamics simulations, we provided the molecular-level delivery mechanism of three typical drugs for the first time, including the lipophilic paclitaxel, hydrophilic gemcitabine, and siRNA encapsulated in liposome, across the BBB. The results show that the BBB is more difficult to be perforated by shock-induced jets than the human brain plasma membrane (PM), requiring higher shock wave speeds. For the pores formed, the BBB exhibits a greater ability to self-heal than PM. Hydrophobic paclitaxel can cross the BBB and be successfully absorbed, but the amount is only one-third of that of PM; however, the absorption of hydrophilic gemcitabine was almost negligible. Liposome-loaded siRNAs only stayed in the first layer of the BBB. The mechanism analysis shows that increasing the bubble size can promote drug absorption while reducing the risk of higher shock wave overpressure. An exponential function was proposed to describe the relation between bubble and overpressure, which can be extended to the experimental microbubble scale. The calculated overpressure is consistent with the experimental result. These molecular-scale details on shock-assisted BBB opening for targeted drug delivery would guide and assist experimental attempts to promote the application of this strategy in the clinical treatment of brain tumors.

Study on dynamic characteristics of cavitation in underwater explosion with large charge.

Underwater explosions (UNDEX) generate shock waves that interact with the air-water interface and structures, leading to the occurrence of rarefaction waves and inducing cavitation phenomena. In deep-water explosions, complex coupling relationships exist between shock wave propagation, bubble motion, and cavitation evolution. The shock wave initiates the formation of cavitation, and their growth and collapse are influenced by the pressure field. The collapsing bubbles generate additional shock waves and fluid motion, affecting subsequent shock wave propagation and bubble behavior. This intricate interaction significantly impacts the hydrodynamic characteristics of deep-water explosions, including pressure distribution, density, and phase changes in the surrounding fluid. In this paper, we utilize a two-fluid phase transition model to capture the evolution of cavitation in deep-water explosions. Our numerical results demonstrate that the introduction of a two-phase vapor-liquid phase change model is necessary to accurately capture scenarios involving prominent evaporation or condensation phenomena. Furthermore, we find that the cavitation produced by the same charge under different explosion depths exhibits significant differences, as does the peak value of cavitation collapse pressure. Similarly, the cavitation produced by different charge quantities under the same explosion depth varies, and the relationship between cavitation volume and charge quantity is not a simple linear increase. The research methods and results presented in this paper provide an important reference for studying the dynamic characteristics of deep-water explosions.

TB or Not TB: Lung Nocardiosis, a Tuberculosis Mimicker.

Nocardia, a gram-positive bacterium found in soil and water, rarely causes infections in immunocompetent patients. Diagnosing and treating nocardiosis can be challenging due to its infrequency and the similarity of its symptoms to other diseases. We describe the case of a middle-aged male with a history of latent tuberculosis who presented with hemoptysis. Imaging revealed a persistent lung mass, and pathology and microbiology studies confirmed Nocardia infection. The patient was treated with antibiotics and discharged home. Pulmonary nocardiosis can mimic tuberculosis, fungal infections, or malignancies. Immunocompetent patients make up one-third of the cases. Diagnosis can be difficult, as the organism takes time to grow in culture, but molecular techniques and histology can aid in diagnosis. Treatment often involves a six- to 12-month course of trimethoprim-sulfamethoxazole (TMP-SMX). Prompt identification of the etiological agent is essential for effective treatment, especially for immunocompetent patients who may not exhibit typical risk factors.

Histotripsy: an innovative approach for minimally invasive tumour and disease treatment.

Histotripsy is a noninvasive medical technique that uses high-intensity focused ultrasound (HIFU) to treat liver tumours. The two main histotripsy methods are boiling histotripsy and cavitation cloud histotripsy. Boiling histotripsy uses prolonged ultrasound pulses to create small boiling bubbles in the tissue, which leads to the breakdown of the tissue into smaller subcellular fragments. Cavitation cloud histotripsy uses the ultrasonic cavitation effect to disintegrate target tissue into precisely defined liquefied lesions. Both methods show similar treatment effectiveness; however, boiling histotripsy ensures treatment stability by producing a stable boiling bubble with each pulse. The therapeutic effect is ascribed to mechanical damage at the subcellular level rather than thermal damage. This article discusses the mechanisms, treatment parameters, and potential of histotripsy as a minimally invasive procedure that provides precise and controlled subcellular damage.

Ultrasound enhanced siRNA delivery using cationic liposome-microbubble complexes for the treatment of squamous cell carcinoma.

Rationale: Microbubble (MB) contrast agents combined with ultrasound targeted microbubble cavitation (UTMC) are a promising platform for site-specific therapeutic oligonucleotide delivery. We investigated UTMC-mediated delivery of siRNA directed against epidermal growth factor receptor (EGFR), to squamous cell carcinoma (SCC) via a novel MB-liposome complex (LPX). Methods: LPXs were constructed by conjugation of cationic liposomes to the surface of C4F10 gas-filled lipid MBs using biotin/avidin chemistry, then loaded with siRNA via electrostatic interaction. Luciferase-expressing SCC-VII cells (SCC-VII-Luc) were cultured in Petri dishes. The Petri dishes were filled with media in which LPXs loaded with siRNA against firefly luciferase (Luc siRNA) were suspended. Ultrasound (US) (1 MHz, 100-µs pulse, 10% duty cycle) was delivered to the dishes for 10 sec at varying acoustic pressures and luciferase assay was performed 24 hr later. In vivo siRNA delivery was studied in SCC-VII tumor-bearing mice intravenously infused with a 0.5 mL saline suspension of EGFR siRNA LPX (7×108 LPX, ~30 µg siRNA) for 20 min during concurrent US (1 MHz, 0.5 MPa spatial peak temporal peak negative pressure, five 100-µs pulses every 1 ms; each pulse train repeated every 2 sec to allow reperfusion of LPX into the tumor). Mice were sacrificed 2 days post treatment and tumor EGFR expression was measured (Western blot). Other mice (n=23) received either EGFR siRNA-loaded LPX + UTMC or negative control (NC) siRNA-loaded LPX + UTMC on days 0 and 3, or no treatment ("sham"). Tumor volume was serially measured by high-resolution 3D US imaging. Results: Luc siRNA LPX + UTMC caused significant luciferase knockdown vs. no treatment control, p<0.05) in SCC-VII-Luc cells at acoustic pressures 0.25 MPa to 0.9 MPa, while no significant silencing effect was seen at lower pressure (0.125 MPa). In vivo, EGFR siRNA LPX + UTMC reduced tumor EGFR expression by ~30% and significantly inhibited tumor growth by day 9 (~40% decrease in tumor volume vs. NC siRNA LPX + UTMC, p<0.05). Conclusions: Luc siRNA LPXs + UTMC achieved functional delivery of Luc siRNA to SCC-VII-Luc cells in vitro. EGFR siRNA LPX + UTMC inhibited tumor growth and suppressed EGFR expression in vivo, suggesting that this platform holds promise for non-invasive, image-guided targeted delivery of therapeutic siRNA for cancer treatment.

Intensified degradation of tartrazine dye present in effluent using ultrasound combined with ultraviolet irradiation and oxidants.

Effluent containing tartrazine can affect the environment and human health significantly prompting the current study into degradation using a sonochemical reactor operated individually and combined with advanced oxidation processes. The optimum conditions for ultrasound treatment were established as dye concentration of 10 ppm, pH of 3, temperature as 35 °C, and power as 90 W. The combination approach of H2O2/UV, H2O2/US, and H2O2/UV/US resulted in higher degradation of 25.44%, 57.4%, and 74.36% respectively. Use of ZnO/UV/US approach increased the degradation significantly to 85.31% whereas maximum degradation as 93.11% was obtained for the US/UV/Fenton combination. COD reduction was found maximum as 83.78% for the US/UV/Fenton combination. The kinetic analysis showed that tartrazine dye degradation follows pseudo first-order kinetics for all the studied processes. Combination of Fenton with UV and US was elucidated as the best approach for degradation of tartrazine.

Recent advances of focused ultrasound induced blood-brain barrier opening for clinical applications of neurodegenerative diseases.

With the aging population on the rise, neurodegenerative disorders have taken center stage as a significant health concern. The blood-brain barrier (BBB) plays an important role to maintain the stability of central nervous system, yet it poses a formidable obstacle to delivering drugs for neurodegenerative disease therapy. Various methods have been devised to confront this challenge, each carrying its own set of limitations. One particularly promising noninvasive approach involves the utilization of focused ultrasound (FUS) combined with contrast agents-microbubbles (MBs) to achieve transient and reversible BBB opening. This review provides a comprehensive exploration of the fundamental mechanisms behind FUS/MBs-mediated BBB opening and spotlights recent breakthroughs in its application for neurodegenerative diseases. Furthermore, it addresses the current challenges and presents future perspectives in this field.

Cavitation suppression and transformation of turbulence structure in the cross flow around a circular cylinder: Surface morphology and wettability effects.

Passive methods of flow and cavitation control appear to offer some of the best prospects in the field of hydraulic engineering and marine applications. In this article, we aimed at an experimental examination of the effect of wall roughness/wettability on the occurrence of cavitation and turbulence structure in the cross flow around and in the wake of a circular cylinder in two characteristic regimes. For this, we used three test bodies with different surface morphologies: smooth (reference), micro-scale irregularities (rough) and regular large-scale (of the order of a millimeter) texture (finned). Using high-speed imaging to observe vapor cavities, we revealed that cavitation is noticeably suppressed by both types of roughness. Applying the method of vapor phase detection (Pervunin et al., 2021), this finding was then quantitatively confirmed through an in-depth analysis of an ensemble of instantaneous velocity fields measured by PIV, indicating that modification of wall morphology is an effective method of cavitation control. The procedure of statistical vector filtration (Heinz et al., 2004) allowed us to remove outliers from the velocity fields and, thus, calculate various turbulence characteristics, including higher-order moments (i.e., the coefficients of skewness and excess). Wall irregularities were found to significantly affect the turbulence structure of the wake flow, but the higher-order moments downstream of the modified-surface cylinders turned out to be unexpectedly insensitive to a change in the flow regime, as opposed to the smooth one. Regardless of the type of surface morphology, the influence of roughness on the mechanism of formation of large-scale vortices and their characteristics was weakened. However, it caused overall disorganization of liquid motion in the cylinder wake, thus making local flow conditions highly unsteady. In addition, this process became more chaotic with an increase in the scale of irregularities.

The flow pattern effects of hydrodynamic cavitation on waste activated sludge digestibility.

The disintegration of raw sludge is of importance for enhancing biogas production and facilitates the degradation of substrates for microorganisms so that the efficiency of digestion can be increased. In this study, the effect of hydrodynamic cavitation (HC) as a pretreatment approach for waste activated sludge (WAS) was investigated at two upstream pressures (0.83 and 1.72 MPa) by using a milli-scale apparatus which makes sludge pass through an orifice with a restriction at the cross section of the flow. The HC probe made of polyether ether ketone (PEEK) material was tested using potassium iodide solution and it was made sure that cavitation occurred at the selected pressures. The analysis on chemical effects of HC bubbles collapse suggested that not only cavitation occurred at low upstream pressure, i.e., 0.83 MPa, but it also had high intensity at this pressure. The pretreatment results of HC implementation on WAS were also in agreement with the chemical characterization of HC collapse. Release of soluble organics and ammonium was observed in the treated samples, which proved the efficiency of the HC pretreatment. The methane production was improved during the digestion of the treated samples compared to the control one. The digestion of treated WAS sample at lower upstream pressure (0.83 MPa) resulted in higher methane production (128.4 mL CH4/g VS) compared to the treated sample at higher upstream pressure (119.1 mL CH4/g VS) and control sample (98.3 mL CH4/g VS). Thus, these results showed that the HC pretreatment for WAS led to a significant increase in methane production (up to 30.6%), which reveals the potential of HC in full-scale applications.

Wear Behavior of Epoxy Resin Reinforced with Ceramic Nano- and Microparticles.

Cavitation erosion poses a significant challenge in fluid systems like hydraulic turbines and ship propellers due to pulsed pressure from collapsing vapor bubbles. To combat this, various materials and surface engineering methods are employed. In this study, nano and micro scale particles of silicon carbide (SiC) or boron carbide (B4C) were incorporated as reinforcement at 6% and 12% ratios, owing to their exceptional resistance to abrasive wear and high hardness. Microparticles were incorporated to assess the damage incurred during the tests in comparison to nanoparticles. Wear tests were conducted on both bulk samples and coated aluminum sheets with a 1mm of composite. Additionally, cavitation tests were performed on coated aluminum tips until stability of mass loss was achieved. The results indicated a distinct wear behavior between the coatings and the bulk samples. Overall, wear tended to be higher for the coated samples with nanocomposites than bulk, except for the nano-composite material containing 12% SiC and pure resin. With the coatings, higher percentages of nanometric particles correlated with increased wear. The coefficient of friction remained within the range of 0.4 to 0.5 for the coatings. Regarding the accumulated erosion in the cavitation tests for 100 min, it was observed that for all nanocomposite materials, it was lower than in pure resin. Particularly, the composite with 6% B4C was slightly lower than the rest. In addition, the erosion rate was also lower for the composites.

Silt erosion and cavitation impact on hydraulic turbines performance: An in-depth analysis and preventative strategies.

The primary issues in the Himalayan Rivers are sediment and cavitation degradation of the hydroelectric power turbine components. During the monsoon season, heavy material is transported by streams in hilly areas like the Himalayas through regular rainfalls, glacial and sub-glacial hydrological activity, and other factors. The severe erosion of hydraulic turbines caused by silt abrasion in these areas requires hydropower facilities to be regularly shut down for maintenance, affecting the plant's overall efficiency. This article provides an in-depth examination of the challenges that can lead to cavitation, silt erosion, and a decrease in the efficiency of various hydroelectric turbines, and it demands attention on the design, manufacture, operation, and maintenance of the turbines. This study's main objective is to critically evaluate earlier theoretical, experimental, and numerical evaluation-based studies (on cavitation and silt erosion) that are provided and addressed throughout the study. As a part of this study, various strategies for mitigating the effects of these problems and elongating the time that turbine may be utilized before they must be replaced have been provided.

Necrotizing Pneumonia With Extensive Lobar Cavitation.

Pneumonia occupies one of the leading positions in morbidity and mortality worldwide. It is frequently categorized depending on the site of acquisition. Here, we present a case of a young woman who was admitted to the Emergency Department (ED) with cough, dyspnea, fever, and progressive worsening associated with palpitations and hypotension. An initial x-ray was followed by a computed tomography (CT) scan of the chest, which revealed signs of extensive left lung pneumonia with pleural effusion. Despite initial improvement after antibiotic treatment, the patient's condition declined. A repeat chest CT showed evidence of extensive lobar cavitations, leading to suspicion of tuberculosis.

Rapid Defect Engineering in FeCoNi/FeAl2O4 Hybrid for Enhanced Oxygen Evolution Catalysis: A Pathway to High-Performance Electrocatalysts.

Rational modulation of surface reconstruction in the oxygen evolution reaction (OER) utilizing defect engineering to form efficient catalytic activity centers is a topical interest in the field of catalysis. The introduction of point defects has been demonstrated to be an effective strategy to regulate the electronic configuration of electrocatalysts, but the influence of more complex planar defects (e.g., twins and stacking faults), on their intrinsic activity is still not fully understood. This study harnesses ultrasonic cavitation for rapid and controlled introduction of different types of defects in FeCoNi/FeAl2O4 hybrid coatings, optimizing OER catalytic activity. Theoretical calculations and experiments demonstrate that the different defects optimize the coordination environment and facilitate the activation of surface reconstruction into true catalytic activity centers at lower potentials. Moreover, it demonstrates exceptional durability, maintaining stable oxygen production at a high current density of 300 mA cm-2 for over 120 hours. This work not only presents a novel pathway for designing advanced electrocatalysts but also deepens our understanding of defect-engineered catalytic mechanisms, showcasing the potential for rapid and efficient enhancement of electrocatalytic performance.

Application of high intensity focused ultrasound combined with nanomaterials in anti-tumor therapy.

High intensity focused ultrasound (HIFU) has demonstrated its safety, efficacy and noninvasiveness in the ablation of solid tumor. However, its further application is limited by its inherent deficiencies, such as postoperative recurrence caused by incomplete ablation and excessive intensity affecting surrounding healthy tissues. Recent research has indicated that the integration of nanomaterials with HIFU exhibits a promising synergistic effect in tumor ablation. The concurrent utilization of nanomaterials with HIFU can help overcome the limitations of HIFU by improving targeting and ablation efficiency, expanding operation area, increasing operation accuracy, enhancing stability and bio-safety during the process. It also provides a platform for multi-therapy and multi-mode imaging guidance. The present review comprehensively expounds upon the synergistic mechanism between nanomaterials and HIFU, summarizes the research progress of nanomaterials as cavitation nuclei and drug carriers in combination with HIFU for tumor ablation. Furthermore, this review highlights the potential for further exploration in the development of novel nanomaterials that enhance the synergistic effect with HIFU on tumor ablation.

Cavitación coroidea asociada a coloboma macular. Estudio multimodal. Imagen en face / Choroid cavitation associated with macular coloboma. Multimodal study. Image en face

La cavitación intracoroidea es un hallazgo identificado con OCT descrito inicialmente en pacientes miopes, pero también aparece en pacientes no miopes. Puede presentarse tanto en el área peripapilar como en el polo posterior. El coloboma macular es un defecto del desarrollo embrionario del polo posterior, y en la OCT estructural es imprescindible la ausencia del epitelio pigmentario de la retina y de los vasos coroideos para su diagnóstico. Este caso presenta la cavitación intracoroidea circunscribiendo el coloboma macular, en ausencia de membrana intercalar. La imagen en face permite valorar la relación entre ambas estructuras, así como la magnitud de las mismas. (AU)

Intrachoroidal cavitation is a finding identified with OCT initially described in myopic patients, it also appears in non-myopic patients. It can occur in both the peripapillary area and the posterior pole. Macular coloboma is a defect of embryonic development of the posterior pole, in structural OCT the absence of the retinal pigment epithelium and choroidal vessels is essential. In this case, intrachoroidal cavitation circumscribes the macular coloboma, in the absence of an intercalary membrane. The face image allows us to assess the relationship between the two structures as well as their magnitude. (AU)

The unveiling of a dynamic duo: hydrodynamic cavitation and cold plasma for the degradation of furosemide in wastewater.

The degradation in water of furosemide (FUR), a widely used diuretic drug, was herein reported. The method entails an integrated approach based on the hybridisation of hydrodynamic cavitation (HC) with electrical discharge (ED) plasma technology. This dynamic duo could increase the production of oxidising compounds in water, in particular hydroxyl radicals (OH radicals), by triggering the rapid homolytic decomposition of water molecules and avoiding the addition of external oxidants. This study clearly emphasises the effectiveness of an integrated approach to improve the degradation of pollutants in wastewater originating from active pharmaceutical ingredients (APIs). The results of HC/ED-assisted FUR degradation in the presence of radical scavengers highlight the predominant role of the radical oxidation mechanism at the gas-liquid interface of the cavitation bubble during HC/ED treatment. A comparative analysis of the three technologies-HC alone, HC/ED and UV alone-emphasised the promising potential of hybrid HC/ED as a scalable industrial technology. This is demonstrated by the higher degradation rates (100%, 10 min) when treating large volumes (5L) of wastewater contaminated with FUR (50 mg/L), even in the presence of other APIs.

On efficient modelling of radical production in cavitation assisted reactors.

Process intensification by cavitation is gaining widespread attention due to the benefits that the intense bubble collapse conditions can provide, yet, several knowledge gaps exist in the modelling of such systems. This work studies the numerical prediction of single bubble dynamics and the various approaches that can be employed to estimate the changes in the chemical composition of cavitating bubbles. Specific emphasis is placed on the prediction of the radical production rates during bubble collapse and the computational performance, with the aim of coupling the single bubble dynamics to flow models for reactor hydrodynamics. The results reveal that the choice of chemical reaction approach has virtually no effect on the bubble dynamics, whereas the predicted radical production rates can differ substantially. It is found that evaluating the radical production only on temperature peaks, an approach commonly followed in literature, may result in the most erroneous estimations (on average 12.8 times larger than those of the full kinetic model), while a simplified kinetic model yields more accurate predictions (2.3 times larger) at the expense of increased computational times. Continuous evaluation of the bubble content by assuming equilibrium when the bubble temperature is above a certain threshold (≈1500K) is shown to be capable of predicting total radical production values close to those estimated by solving the kinetics of a detailed reaction model (19.8% difference), as well as requiring only 22.2% more computational costs compared to simulations without chemical reaction modelling. Such an equilibrium approach is therefore recommended for future studies aiming to couple flow simulations with single bubble dynamics to accurately predict radical production rates in cavitation devices, involving numerous bubbles following different flow trajectories. Furthermore, an algebraic expression that successfully approximates the full kinetic simulation results is proposed as a function of the initial nucleus size and the time integral of the liquid pressure when it is under vapor pressure. Such a model can be applied in modelling efforts that do not require local instantaneous radical concentrations, and paves the way for efficient closure modelling of radical production in CFD simulations of hydrodynamic reactors.

Dynamics of cavitation bubbles in viscous liquids in a tube during a transient process.

We experimentally, numerically, and theoretically investigate the dynamics of cavitation bubbles in viscous liquids in a tube during a transient process. In experiments, cavitation bubbles are generated by a modified tube-arrest setup, and the bubble evolution is captured with high-speed imaging. Numerical simulations using OpenFOAM are employed to validate our quasi-one-dimensional theoretical model, which effectively characterizes the bubble dynamics. We find that cavitation onset is minimally affected by the liquid viscosity. However, once cavitation occurs, various aspects of bubble dynamics, such as the maximum bubble length, bubble lifetime, collapse time, and collapse speed, are closely related to the liquid viscosity. We further establish that normalized bubble dynamics are solely determined by the combination of the Reynolds number and the Euler number. Moreover, we also propose a new dimensionless number, Ca2, to predict the maximum bubble length, a critical factor in determining the occurrence of liquid column separation.

Experimental investigation on the characteristics of the shock wave emitted by the cavitation bubble near the air bubble.

This study explores the mitigation of cavitation damage in hydraulic engineering through air entrainment. The primary aim is to experimentally analyze the shock wave characteristics emitted by cavitation bubbles adjacent to air bubbles affixed to a tube nozzle. The schlieren optical system is utilized to visualize the shock wave, while a hydrophone measures its pressure. Experiments are conducted on cavitation bubbles induced by the spark-generated method in the vicinity of air bubbles, varying the dimensionless distances and sizes of the air bubbles. The results indicate that (1) The introduction of an air bubble noticeably changes the morphology, kinematic behavior, and shock wave features of the cavitation bubble. (2) Four distinct shock wave patterns are identified based on the quantity and shape of the shock wave, with variations in the cavitation bubble's collapsing behavior and shock wave characteristics across different patterns. (3) The dimensionless distance γ and size δ exert significant influence on the shock wave's quantity, pressure peak, shape, and energy. With γ decreases or δ increases, the shock wave quantity increases while the shock wave intensity decreases. This investigation of the interaction between cavitation bubbles and air bubbles is essential for elucidating the mechanism through which air entrainment mitigates cavitation damage.